A set of pullers MS0204 for replacement of rear bearings in alternator rotors.

One of the most common faults encountered by mechanics at the workshop is worn bearings on the alternator. Worn (broken) bearings can cause the alternator to jam and, as a consequence, the belt drive to stall or break. The consequences of such an engine malfunction can be very unpredictable.

To correct the problem, the bearings must be replaced. The procedure is not difficult, but requires care - otherwise you could scratch the collector rings or damage the winding. To successfully repair the generator, you will need a good mechanic and a special tool. If the latter is a problem and you doubt that you can perform the operation quickly, accurately and without losses, MSG Equipment's special tools will help you. MSG's line of starter and alternator tools allow auto mechanics to do their jobs with jewellery-like precision.

The puller setMS0204 is used to replace alternator rotor rear bearings. Using the pullers allows you to quickly remove the bearings without damaging the slip rings. Used for bearings 6203, 6202, 6003, 6201,141071,140419 and their analogues, which are used in 90% of generators of world manufacturers, such as Bosch, Valeo, Magneti Marelli, Mitsubishi, Delco Remy and others.

Very often in order to fix, you first need to disassemble. MSG Equipment's specialised starter and alternator tools make complex work simple, allowing you to reach hard to reach places, remove the part without deforming it or damaging anything around it. With our tools, speed and quality are complementary, not mutually exclusive.